{"title":"Driveline Acc","description":null,"products":[{"product_id":"5071-1a-rough-country-cv-drive-shaft","title":"Rough Country 5071.1A - CV Drive Shaft","description":"\u003cp\u003eThis double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange.\u003c\/p\u003e\n\u003cp\u003eThese flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop.\u003c\/p\u003e\n\u003cp\u003eThis also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurment: 35. 5-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurment: 38-inches\u003c\/li\u003e\n\u003cli\u003eEliminates contact between the stock drive shaft and oil pan on automatic transmission models.\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes Brute Force Red seals\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the botom of your Jeep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Only fits Dana 30 or Dana 44 front axle models. Recommended on models with 3.5in - 6in of lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eMaterial Steel\u003c\/li\u003e\n\u003cli\u003eLocation Front\u003c\/li\u003e\n\u003cli\u003eDoors 2 Door|4 Door\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 38.0 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 35.5 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard  in.off the shelf in. mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Front; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Incl. Flanges; Yokes; Hardware; Fits Dana 30 and Dana 44 Front Axles;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003e10-Stage Variable Valving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHigh Pressure Nitrogen Charged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEliminates Contact Between The Stock Drive Shaft And Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eOn Automatic Transmission Models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGood Choice To Eliminate Vibration Issues\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Brute Force Red Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong As The Factory Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard  in.off the shelf in. mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536076071197,"sku":"DHTP_5071.1A","price":553.4,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/jk_frt_driveshaft-5096-1.jpg?v=1757439364"},{"product_id":"5075-1-rough-country-cv-drive-shaft","title":"Rough Country 5075.1 - CV Drive Shaft","description":"\u003cp\u003eThis double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurement: 14. 25-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurement: 17. 75-inches\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep TJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes Brute Force Red seals\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the botom of your Jeep. Running length: 16. 5in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. A Slip Yoke Eliminator is Required. Recommended on models with 4in - 6in of lift. Does Not fit Rubicon models. Does Not fit Unlimited models. Does Not fit 97-02 models with 4cyl engine and 3-speed auto transmission. Please use 5080. 1 Does Not fit 05-06 models with 2. 4L 4cyl engine and 6-speed manual transmission. Please use 5080. 1\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Rear\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 17.75 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 14.25 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Rear; For 4-6 in. Lift; Incl. Flanges; Yokes; Hardware; Collapsed Length 14.25 in.; Extended Length 17.75 in.; Fits Dana 35 w\/Auto Trans; Dana 44 w\/Man. Trans;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCollapsed Length: 14.25 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eExtended Length: 17.75 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eRunning Length: 16.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft Is A Good Choice To Eliminate Vibration Issues\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Brute Force Red Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong As The Factory Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536093077789,"sku":"DHTP_5075.1","price":441.75,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/tj_driveshaft-5080.jpg?v=1757439365"},{"product_id":"5076-1-rough-country-cv-drive-shaft-rear-for-4-6-in-lift-incl-flanges-yokes-hardware","title":"Rough Country 5076.1 - CV Drive Shaft Rear For 4-6 in. Lift Incl. Flanges Yokes Hardware","description":"\u003cp\u003eThis double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurement: 31. 75-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurement: 35. 25-inches\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep XJ Cherokee a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the botom of your Jeep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e A Slip Yoke Eliminator is Required. Recommended on models with 4in - 6in of lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Rear\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 35.25 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 31.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Rear; For 4-6 in. Lift; Incl. Flanges; Yokes; Hardware;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft Eliminates Vibration; Provides Lasting Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs The Factory Equipped Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of The Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGet Grease To The Joints That Need It And Not All Over The Bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536108282141,"sku":"DHTP_5076.1","price":408.15,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/jeep-cv-drive-shaft_5075-1-base.jpg?v=1757439365"},{"product_id":"5077-1-rough-country-cv-drive-shaft-rear-for-6-in-lift-incl-flanges-yokes-hardware","title":"Rough Country 5077.1 - CV Drive Shaft Rear For 6 in. Lift Incl. Flanges Yokes Hardware","description":"\u003cp\u003eThis double cardan style CV drive shaft is recommended for 94-95 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurement: 17. 75-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurement: 21. 25-inches\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep YJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the botom of your Jeep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e A Slip Yoke Eliminator is Required. Recommended on YJ models with 6in of lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Rear\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 21.25 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 17.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is recommended for 94-95 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Rear; For 6 in. Lift; Incl. Flanges; Yokes; Hardware;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft Eliminates Vibration; Provides Lasting Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs The Factory Equipped Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of The Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGet Grease To The Joints That Need It And Not All Over The Bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is recommended for 94-95 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536111132957,"sku":"DHTP_5077.1","price":5.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/jeep_rear_6.jpg?v=1757439365"},{"product_id":"50-7907-rough-country-np231-slip-yoke-eliminator","title":"Rough Country 50-7907 - NP231 Slip Yoke Eliminator","description":"\u003cp\u003eJeep model NP231 transfer cases have one glaring weak point. They use a slip yoke on the rear output shaft of the transfer case instead of having a fixed yoke and a drive shaft with slip splines.\u003c\/p\u003e\n\u003cp\u003eThis design works fine on the street but once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much.\u003c\/p\u003e\n\u003cp\u003eThis Heavy Duty Slip Yoke eliminator kit includes everything to modify your transfer case, this kit does Require our extended travel drive shaft, which helps to prevent driveline vibration and the rear ouput shaft from breaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConverts transfer case from slip yoke to a fixed yoke for improved off-road durability and performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e For use with NP231 model transfer cases Only. Designed with the most current design shaft found in the New Process Gear NP231. This current design shaft was introduced in 1997. Jeep vehicles using the early NP231 can still use our kit, providing that the needle bearings are removed from the stock drive sprockets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eMount Style Bolt On\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e Jeep model NP231 transfer cases have one glaring weak point. They use a slip yoke on the rear output shaft of the transfer case instead of having a fixed yoke and a drive shaft with slip splines.  This design works fine on the street but once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much. This Heavy Duty Slip Yoke eliminator kit includes everything to modify your transfer case, this kit does require our extended travel drive shaft, which helps to prevent driveline vibration and the rear ouput shaft from breaking.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eNP231 Slip Yoke Eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eNP231 Slip Yoke Eliminator;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eConvert Transfer Case From Slip Yoke To A Fixed Yoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eJeep model NP231 transfer cases have one glaring weak point. They use a slip yoke on the rear output shaft of the transfer case instead of having a fixed yoke and a drive shaft with slip splines.  This design works fine on the street but once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much. This Heavy Duty Slip Yoke eliminator kit includes everything to modify your transfer case, this kit does require our extended travel drive shaft, which helps to prevent driveline vibration and the rear ouput shaft from breaking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eSlipYokeElimHdwKt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536119750941,"sku":"DHTP_50-7907","price":437.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/np231-sye_50-7906-base.jpg?v=1757439375"},{"product_id":"5082-1-rough-country-autotrac-drive-shaft-front-for-4-6-in-lift","title":"Rough Country 5082.1 - Autotrac Drive Shaft Front For 4-6 in. Lift","description":"\u003cp\u003eThis double cardan style CV drive shaft is necessary for vehicles equipped with Autotrac.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e After lifting many full sized vehicles a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Necessary for 88-98 GM Pickup or 92-99 GM SUV models equipped with Autotrac and with 4in - 6in of suspension lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Front\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is necessary for vehicles equipped with Autotrac.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eAutotrac Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eAutotrac Drive Shaft; Front; For 4-6 in. Lift;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncreased Ground Clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eMaintains Factory Track Width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is necessary for vehicles equipped with Autotrac.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536125813021,"sku":"DHTP_5082.1","price":5.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/gm-cv-drive-shaft_5082-base.jpg?v=1757439375"},{"product_id":"5085-1-rough-country-cv-drive-shaft-rear-for-4-6-in-lift-incl-flanges-yokes-hardware","title":"Rough Country 5085.1 - CV Drive Shaft Rear For 4-6 in. Lift Incl. Flanges Yokes Hardware","description":"\u003cp\u003eThis double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurement: 23. 25-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurement: 26. 75-inches\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep TJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints. Shaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the botom of your Jeep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e A Slip Yoke Eliminator is Required. Does Not fit Rubicon models. Only fits 04-06 Unlimited models. Recommended on models with 4in - 6in of lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Rear\u003c\/li\u003e\n\u003cli\u003eDoors 4 Door\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 26.75 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 23.25 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Rear; For 4-6 in. Lift; Incl. Flanges; Yokes; Hardware;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft Eliminates Vibration; Provides Lasting Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs The Factory Equipped Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of The Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGet Grease To The Joints That Need It And Not All Over The Bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is recommended for Jeep TJ Wrangler models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536148390173,"sku":"DHTP_5085.1","price":5.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/jeep-cv-drive-shaft_5075-1-base_2.jpg?v=1757439375"},{"product_id":"5095-1-rough-country-cv-drive-shaft","title":"Rough Country 5095.1 - CV Drive Shaft","description":"\u003cp\u003eThis double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange.\u003c\/p\u003e\n\u003cp\u003eThese flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop.\u003c\/p\u003e\n\u003cp\u003eThis also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurement: 33. 75-inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurement: 37. 25-inches\u003c\/li\u003e\n\u003cli\u003eEliminates contact between the stock drive shaft and oil pan on automatic transmission models.\u003c\/li\u003e\n\u003cli\u003eAfter lifting your Jeep JK Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.\u003c\/li\u003e\n\u003cli\u003eIncludes Brute Force Red seals\u003c\/li\u003e\n\u003cli\u003eIncludes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003cli\u003eGrease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and Not all over the bottom of your Jeep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Only fits Dana 30 and 44 front axle models. Recommended on models with 3.5in - 6in of lift.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eMaterial Steel\u003c\/li\u003e\n\u003cli\u003eLocation Front\u003c\/li\u003e\n\u003cli\u003eDoors 2 Door|4 Door\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 37.25 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 33.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Drive Shaft; Front; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Incl. Flanges; Yokes; Hardware; Collapsed Length 33.75 in.; Extended Length 37.25 in.;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003e10-Stage Variable Valving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHigh Pressure Nitrogen Charged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEliminates Contact Between The Stock Drive Shaft And Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eOn Automatic Transmission Models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGood Choice To Eliminate Vibration Issues\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Brute Force Red Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality CV Joints\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong As The Factory Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGrease Fittings Are Out Of Way Of The Transmission Oil Pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGet Grease To The Joints That Need It And Not All Over The Bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":45536184893725,"sku":"DHTP_5095.1","price":569.48,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/jeep-cv-drive-shaft_5096-1-base_3.jpg?v=1757439396"},{"product_id":"5089-1-rough-country-cv-driveshaft","title":"Rough Country 5089.1 - CV Driveshaft","description":"\u003cp\u003eGet the most out of your Ford Ranger with Rough Country's Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift.\u003c\/p\u003e\n\u003cp\u003eThis upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollapsed Measurment: 26 3\/4 Inches\u003c\/li\u003e\n\u003cli\u003eExtended Measurment: 29 3\/4 Inches\u003c\/li\u003e\n\u003cli\u003eReduces drive line vibrations Includes better quality CV joints.\u003c\/li\u003e\n\u003cli\u003eShaft strength is twice as strong as the factory equipped drive shaft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e Works on Ford Ranger with 5in of lift Only\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold As Each\u003c\/li\u003e\n\u003cli\u003eLocation Front\u003c\/li\u003e\n\u003cli\u003eDrive 4WD\u003c\/li\u003e\n\u003cli\u003eExtended Length 29.75 inch\u003c\/li\u003e\n\u003cli\u003eCollapsed Length 26.75 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e Get the most out of your Ford Ranger with Rough Countrys Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift. This upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCV Driveshaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCV Driveshaft; Incl. Extended CV Driveshaft; Flanges; Yokes; Hardware; Collapsed Length: 36-3\/8 in.; Extended Length; 39-1\/2 in.;\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCollapsed Measurement: 36 3\/8 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eExtended Measurement: 39 1\/2 Inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eReduces Drive Line Vibrations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eIncl. Better Quality Cv Joints.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eShaft Strength Is Twice As Strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs The Factory Equipped Drive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eGet the most out of your Ford Ranger with Rough Countrys Front CV Driveshaft! This extended drive shaft is designed to promote a better geometry on any Ford Ranger with a 5in suspension lift. This upgrade helps eliminate vibration issues and is much more durable than the factory shaft operating on a lifted vehicle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eDrive Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e \u003ciframe width=\"640\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/m2lr67XXpU8\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\" \"\u003e\u003c\/iframe\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":46432055230749,"sku":"DHTP_5089.1","price":650.96,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/00-10_ranger_drive-shaft-5089_1.jpg?v=1757462455"},{"product_id":"rough-country-5071-1b-cv-drive-shaft-front-jeep-wrangler-jk-wrangler-unlimited-4wd-2012-2018","title":"Rough Country 5071.1B CV Drive Shaft | Front | Jeep Wrangler JK\/Wrangler Unlimited 4WD (2012-2018)","description":"This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard \"off the shelf\" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003elink\u003c\/td\u003e\n\u003ctd\u003ehttps:\/\/www.roughcountry.com\/product\/front-cv-drive-shaft-jeep-jk-5071\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efeatures\u003c\/td\u003e\n\u003ctd\u003eCollapsed Measurment: 35.5-inches\\\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003enotes\u003c\/td\u003e\n\u003ctd\u003eONLY fits Dana 30 or Dana 44 front axle models. Recommended on models with 3.5in - 6in of lift.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003einstall_time\u003c\/td\u003e\n\u003ctd\u003e2-3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efront_components\u003c\/td\u003e\n\u003ctd\u003enan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003erear_components\u003c\/td\u003e\n\u003ctd\u003enan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003einstructions\u003c\/td\u003e\n\u003ctd\u003ehttps:\/\/s3.amazonaws.com\/roughcountry\/install\/92RC5096.pdf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efitment\u003c\/td\u003e\n\u003ctd\u003e2012-2017:4WD:Jeep:Wrangler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ediscount\u003c\/td\u003e\n\u003ctd\u003e25.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003emultiple_box\u003c\/td\u003e\n\u003ctd\u003eN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eshipping_group\u003c\/td\u003e\n\u003ctd\u003eNo Restrictions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ecoo\u003c\/td\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eutv_product\u003c\/td\u003e\n\u003ctd\u003eN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eadded_date\u003c\/td\u003e\n\u003ctd\u003e2013-06-13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Rough Country","offers":[{"title":"Default Title","offer_id":50825178022173,"sku":"DHTP_5071.1B","price":709.55,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/files\/jk_frt_driveshaft_-_5096-1.jpg?v=1768159054"}],"url":"https:\/\/www.mytruckpoint.com\/collections\/driveline-acc.oembed","provider":"TruckPoint","version":"1.0","type":"link"}